Vr Mapping







Vr Mapping Version 5 is available in both 32-bit and 64-bit versions. The 32-bit version runs on Windows XP and Windows 7 32-bit and Windows 7 64-bit. The 64-bit version of Vr Mapping runs only on Windows 7 64-bit. For information on graphics drivers, please see Graphics Card Drivers.

Windows 7

Quadro FX 1400 Graphics Card

Stereo display is not supported by the NVIDIA drivers for the Quadro FX 1400 graphics card in Windows 7.


The 32-bit version of VrBalance is supported only.

Immersion / Stealth E-Mouse

Vr Mapping version 05.02.00 (32-bit and 64-bit) and above supports the Immersion / Stealth E-Mouse for Windows 7.

CEC-488 Interface Card

This card is used to connect VrOne to the Zeiss P1/P2/P3 stereo plotters using the GPIB interface instead of the serial (RS-232) interface. It is not supported in Windows 7 64-bit and although it should run in Windows 7 32-bit, it has not been tested in this configuration.

Windows XP

The NVIDIA Quadro FX 1400 Graphics Card and Dual and Single Monitors with Version 5

In order to run a stereo window on one screen and a 2D graphics window on the other screen on Windows XP, the NVIDIA driver 191.87 is required for version 05.02.00 and above. On systems that use a single stereo display, the NVIDIA graphics card driver versions from 191.87 to 197.90 may be used. See Graphics Card Drivers for more information.

Vr Mapping Version 5

Basic Graphics Card Requirements

Vr Mapping version 5 requires an OpenGL based graphics card that supports Frame Buffer Objects. Your system can be tested for compatibility with Vr Mapping version 5 by downloading and installing a test program. This program will be made available before downloading version 5 from the web page. The use of this small test program is recommended before downloading the full installation. This graphics card requirement applies to all graphics in Vr Mapping. To display 3D stereo a supported stereo graphics card is required.