Vr Mapping

ON-LINE REFERENCE DOCUMENTATION

CARDINAL SYSTEMS, LLC

www.cardinalsystems.net

Symbol Fill (SymFill)

Type: Interactive/Batch Application

 

Fills a user-defined polygon with symbols or spot elevations.

Description

Specified spacing is used to place symbols or spot elevation or elevation text labels in a user-defined polygon. If the area has been modeled using DTM, the points placed may be draped onto the current DTM surface.

Local Commands

Key-in

Description

Range

TYPE=

Point type

0=Symbol 1=Spot Elevation 2=Text only

GRIRES=

Grid resolution

Ground units

GRIOFSX=

Grid offset X

Ground units

GRIOFSY=

Grid offset Y

Ground units

TEXOFSX=

Text offset X

Inches | Mm

TEXOFSY=

Text offset Y

Inches | Mm

DECACC=

Decimal accuracy for Z text labels

0-10

FILDIR=

Fill direction

0=East ascending

1=East descending

2=East meander

3=North ascending

4=North descending

5=North meander

Symbol Parameters

 

 

LAY=

Layer number

1-10001

GRP=

Graphic pointer

1-60

PEN=

Pen number

1-256

CON=

Construction flag

0-1

NGR=

Non graphic pointer

32 bit

LNK=

Link number

32 bit

FC=

Feature code

48 characters

RAD=

Symbol radius

Inches | Mm

ROT=

Symbol rotation

0-360 degrees

FKEY=

Set symbol and text parameters to function key parameters

Function key name

Text Parameters

 

 

LAY1=

Layer number

1-10001

GRP1=

Graphic pointer

1-60

PEN1=

Pen number

1-256

CON1=

Construction flag

0-1

NGR1=

Non graphic pointer

32 bit

LNK1=

Link number

32 bit

FC1=

Feature code

48 characters

FNT=

Font number

1-12

JX=

Justification X

1=Lower 2=Center 3=Upper 4=Decimal

JY=

Justification Y

1=Left 2=Center 3=Right

HGT=

Text height

Inches | Mm

WDT=

Text width

Inches | Mm

ROT1=

Text rotation

0-360 degrees

SLT=

Text slant

-180 – 180 degrees

Parameters

Point type (TYPE=)

Defines the type of point that will be placed. Options are symbol, spot elevation, or text elevation, a text label of the elevation using decimal justification.

Grid resolution (GRIRES=)

Defines the grid resolution to fill line.

Grid Offsets (GRIOFSX=, GRIOFSY=)

Defines X,Y distances to add to the current grid value when filling. They are commonly used when filling an area that has already been filled to place new points in between existing ones.

Text Offsets (TEXOFSX=, TEXOFSY=)

Defines the distance from the grid point to place the text label. These values are normally non-zero when spot elevations are being placed.

Decimal Accuracy (DECACC=)

Defines the number of places to the right of the decimal point to display for elevation text labels.

Fill direction (FILDIR=)

Specifies the order in which points are placed within the polygon. Options are East ascending, East descending, East meander, North ascending, North descending and North meander.

Elevations

The elevations for symbols, spot elevation or text placed by Symbol Fill are obtained from the current Z Source. If the DTM engine is active, the elevations will be based on the current DTM surface if the Z Source is set accordingly.

Button Assignments

Symbol Fill

 

Button

Description

1

Id line

Identifies the line to fill with symbols.

2

 

 

3

 

 

4

 

 

5

 

 

6

 

 

7

Parameters

Enter fill parameters from a dialog box.

8

Symbol params

Enter symbol parameters from a dialog box.

9

Text params

Enter text parameters from a dialog box.

*

 

 

0

 

 

#

End

Ends this application.